Job Description (JD)
Nama Program | Proses Kimpalan Arka Gas Tungsten [MC-026-3:2012] |
---|---|
Kod CU | MC-026-3:2012-C03 |
Competency | Core |
Tajuk CU | GAS TUNGSTEN ARC WELDING (GTAW) FOR 5G AND 6G (UP-HILL AND DOWN-HILL) |
Penerangan CU | Gas Tungsten Arc Welding (GTAW) For 5G And 6G describes the competency of a welder to perform GTAW process in specified positions on carbon steel, aluminium, stainless steel, copper nickel according to established welding procedure specification (WPS) and work instruction. The person who is competent in performing Gas Tungsten Arc Welding (GTAW) For 5G And 6G will be able to Carry out safety assessment at work area; Comply to work instruction and relevant welding procedure specification (WPS); Verify based metal used; Verify consumable as specified; Check GTAW equipment and accessories functionality; Perform GTAW process; Perform visual inspection and specimen test (destructive test); and Compile work completion checklist. |
Tempoh Latihan | 636 |
Objektif Pembelajaran | The person who is competent in this CU shall be able to perform gas tungsten arc welding (GTAW) for 5G and 6G (up-hill and down-hill) positions on carbon steel, aluminium, stainless steel or copper nickel material. Upon completion of this competency unit, trainees will be able to:- 1. Carry out safety assessment at work area 2. Comply to work instruction and relevant Welding Procedure Specification (WPS) 3. Verify base metal material used 4. Verify consumable as specified 5. Check GTAW equipment and accessories functionality 6. Perform GTAW process 7. Perform visual inspection and testing (destructive test) 8. Compile work completion checklist |
Pra-Syarat | 0 |