Job Description (JD)
| Nama Program | Proses Kimpalan Gas Logam [MC-025-3:2012] |
|---|---|
| Kod CU | MC-025-3:2012-C01 |
| Competency | Core |
| Tajuk CU | GAS METAL ARC WELDING (GMAW) FOR FILLET WELD 1F, 2F, 3F, 4F, BUTT WELD 1G AND 2G |
| Penerangan CU | Gas Metal Arc Welding (GMAW) For Fillet weld 1F, 2F, 3F, 4F, Butt Weld 1G and 2G describes the competency of a welder to perform GMAW process in specified positions on carbon steel, aluminium, stainless steel, copper nickel according to established welding procedure specification (WPS) and work instruction. The person who is competent in performing Gas Metal Arc Welding (GMAW) For Fillet weld 1F, 2F, 3F, 4F, Butt Weld 1G and 2G will be able to Carry out safety assessment at work area; Comply to work instruction and relevant welding procedure specification (WPS); Verify based metal used; Verify consumable as specified; Check GMAW equipment and accessories functionality; Perform GMAW process; Perform visual inspection and specimen test (destructive test); Carry out back gouging and grinding as required in accordance with test specimen (plate and pipe); and Compile work completion checklist. |
| Tempoh Latihan | 536 |
| Objektif Pembelajaran | The person who is competent in this CU shall be able to perform gas metal arc welding (GMAW) for fillet weld 1F, 2F, 3F, 4F, butt weld 1G and 2G positions on carbon steel, aluminium, stainless steel or copper nickel material. Upon completion of this competency unit, trainees will be able to:- 1. Carry out safety assessment at work area 2. Comply to work instruction and relevant Welding Procedure Specification (WPS) 3. Verify base metal material used 4. Verify consumable as specified 5. Check GMAW equipment and accessories functionality 6. Perform GMAW process 7. Perform visual inspection and testing (destructive test) 8. Carry out back gouging, grinding and back welding as required in accordance with test specimen 9. Compile work completion checklist |
| Pra-Syarat | 0 |