Job Description (JD)
| Nama Program | Proses Kimpalan Arka Berteras Logam [MC-027-3:2012] |
|---|---|
| Kod CU | MC-027-3:2012-C02 |
| Competency | Core |
| Tajuk CU | FLUX CORED ARC WELDING (FCAW) FOR 3G AND 4G |
| Penerangan CU | Flux Cored Arc Welding (FCAW) For 3G And 4G describes the competency of a welder to perform FCAW process in specified positions on carbon steel according to established welding procedure specification (WPS) and work instruction. The person who is competent in performing Flux Cored Arc Welding (FCAW) For 3G And 4G will be able to Carry out safety assessment at work area; Comply to work instruction and relevant welding procedure specification (WPS); Verify based metal used; Verify consumable as specified; Check FCAW equipment and accessories functionality; Perform FCAW process; Perform visual inspection and specimen test (destructive test); Carry out back gouging and grinding as required in accordance with test specimen (plate); and Compile work completion checklist. |
| Tempoh Latihan | 520 |
| Objektif Pembelajaran | The person who is competent in this CU shall be able to perform flux cored arc welding (FCAW) for 3G and 4G positions on carbon steel material. Upon completion of this competency unit, trainees will be able to:- 1. Carry out safety assessment at work area 2. Comply to work instruction and relevant Welding Procedure Specification (WPS) 3. Verify base metal material used 4. Verify consumable as specified 5. Check FCAW equipment and accessories functionality 6. Perform FCAW process 7. Perform visual inspection and testing (destructive test) 8. Carry out back gouging, grinding and back welding as required in accordance with test specimen 9. Compile work completion checklist |
| Pra-Syarat | 0 |