Job Description (JD)
| Nama Program | Penyelenggaraan Instrumen (Pesisiran Pantai)(Minyak, Gas & Petrokimia) [OG-017-3:2013] |
|---|---|
| Kod CU | OG-017-3:2013-C03 |
| Competency | Core |
| Tajuk CU | PROCESS CONTROL SYSTEMTROUBLESHOOTING |
| Penerangan CU | A process control system is used to monitor data and control equipment on the plant. Very small installations may use hydraulic or pneumatic control systems, but larger plants with up to 30.000 signals to and from the process require a dedicated distributed control system. The purpose of this system is to read values from a large number of sensors, run programs to monitor the process and control valves switches etc. to control the process. At the same time values, alarms, reports and other information are presented to the operator and command inputs accepted. The main function of the control system is to make sure that the production, processing and utility systems operate efficiently within design constraints and alarm limits. The control is typically specified in programs as a combination of logic and control function blocks such as AND, ADD, PID. The person who is competent in this CU shall be able to identify process control components troubleshooting requirements, perform process control components visual and physical inspection, perform process control components routine service, perform process control components functionality test and prepare maintenance report. The outcome of this competency is to ensure that plant is operated safely, eliminating all the risk associated with fire & gas leak. The personnel who will be competent in this competency must in prior have the following competencies:- Process Control System Maintenance |
| Tempoh Latihan | 240 |
| Objektif Pembelajaran | 0 |
| Pra-Syarat | 0 |